If you want to remove the rain drain inside the bonnet to get a better cooling, sometimes your old guy stands in the rain. Nobody likes that. Therefore i developed
...さらに表示 these rain guards, which fit perfectly on the AW11 NA Mesh and still have the opportunity to let hot air out.
Mounting is easy with 4 RC Car clips.
Our part in the picture is made from recycled material, so maybe the pictures show some imperfections, but be sure, the model is fine :)
Follow us on Youtube: Jumuworks
For Producer:
It is designed for a 0,8mm nozzle and prints ~90min with 35mm/s. Check your supports in the preview to get a well printed part. Print upside down - only supports needed at outlet.
For Customer:
These are two parts
- the cover (ASA recommended /PETG/ ABS but painted)
- the sealing (TPE/TPU)
You can give it a resin coat or clear coat for glossy finish and more UV resistance, if printing with materials like ABS.
If you want to drive with it, use ASA and a TPE Sealing, if it is just a rain cover while parking petg should be fine.
You need 4 of them!
