****under test and development****
Well I finally bought a Dillon XL650 so time to progress this design a bit. Note should work on other presses as well.
223
...さらに表示 / 556 bullet collator assembly for 55gr flat base FMJs at present (probably OK for 62gr FMJs not tested though),
Designed to be printed on a 200x200mm 3D printer.
Note this is a test only, it needs finishing. Some parts missing.
a) Collator plate (mk2 - 19/4/2018)
b) Nose guide plate and distance plate (mk1b - 21/4/2018)
c) nose flip ramp (Mk1 - 20-4-2018)
d) collator base body (mk1b - 21/4/2018)
e) Tube converter to Mr Bullet Feeder 10mm (small) slinky tube (mk1b - 21/4/2018)
This will need a mechanism to place the bullet on the case, Hornady and RCBS to name but 2 do these.
Other parts
a) 6mm ID flange to mount collator plate to motor,
https://www.aliexpress.com/item/Aluminum-alloy-flange-coupling-5mm-red-6mm-blue-8mm-purple-flange-seat-axle-shaft-support-seat/32798324709.html
b) Suitable 15rpm motor (ZGB37RH 12VDC 37mm 15rpm),
https://www.aliexpress.com/item/12VDC-37mm-Large-torque-gear-motor-80RPM-ZGB37RH-Positive-inversion-ECCenter-shaft-with-ZYDT555-motor/32813387794.html
c) Suitable motor controller,
https://www.aliexpress.com/item/Digital-display-PWM-speed-controller-DC-motor-0-100-adjustable-drive-module-Input-12V-24V-40A/32856323198.html
d) Other parts, to be determined.
e) bolts, M3 SS nuts, washers and bolts of various lengths, to be determined
f) brass thread inserts M3, to be determined.
g) This design will use Mr BulletFeeder Pro 223 bullet seater to place bullet on case as its the cheapest I can find without designing my own one.
Licence.
All parts designed by me from scratch are under GPL.
All parts designed by previous unknown person (seems to have disappeared off thingiverse) will be subject to his licence terms (if not GPL).
