CR 10 Control Box Stand with Shelves

モデル制作者
Gravatar image
loading...
Model Description
I wanted to put the CR-10 control box on a riser - the hot-end cables became too short after some modifications.

After designing the legs, rather than have a...さらに表示 big empty space underneath, I integrated some drawers which have been very handy so far.

You'll need:

2x Legs
2x Shelves
4x Rails
(no mirroring required)

4x M3x12mm Cap Screws
8x 625 RS Bearings (5mmx16mmx5)
モデル制作者について
Gravatar image
No uploads
承認されたプロフィール