<h3>Please Note: This is for the 7i - Integrated version of the PanelDue, the old style 7" with separate controller board will not
...さらに表示 fit.</h3>
Update 5/3/18 - Uploaded my version 2. Screws come from behind on this one and includes a 3030 mount
Pretty basic design:
- Holes for reset and erase buttons
- Speaker grill
- Cutout on the back for the 4-pin connector. (If people need one with other cutouts I can make that happen as well.)
Everything mounts together using 10mm long M3 socket cap screws, Once assembled the screws should sit flush with the front face.
On the rear are four bolts to attach your design for a mount, uploaded is a simple mount that I plan to use. If you want to make your own it's designed with 4 M3 threaded holes on a 40mm square.
