Zoom H5 Belt Clip + Hard Case

モデル制作者
Gravatar image
loading...
Model Description
So, you got yourself a fancy Zoom H5 audio recorder but no way to clip it to your person - no problem, just print this out.

I printed this in polycarbonate...さらに表示 because I am paranoid and absolutely did not want it to fail. Honestly, good old PLA would probably do fine but might be a little too stiff. Nylon might be a good choice as well.

I would recommend buying the 1/4-20 x 1/4" screw instead of printing it, otherwise you are putting a lot of faith (and risking a lot of money) on how well you can get good inter-layer adhesion with your printed screw. I did mine in Polymaker PC+ and so far so good, but I will probably replace it once it snaps off and my H5 crashes to the ground :)

***UPDATE 7-4-2018 ***
I added a hard case to store the Zoom H5 with the clip attached since it would not fit in the stock case. Simply attach the bottom to the sides with a little glue and four M3 screws after printing. Also, there is some room in the case to add some foam padding if you would like.
モデル制作者について
Gravatar image
No uploads
承認されたプロフィール