EDAGmask4all から Sebastian

モデル制作者
loading...
Model Description
With these 3D printed holders you can create your own mask. Normally you would have to sew a textile with a rope to make a mask. With this clamping solution you can...さらに表示 easily fix different textiles between the holders and wear them with an elastic cord on your face. The connection can be loosened again to change the textiles.

- The data contains a pair for one mask. -

Visit our website for more information:
https://www.edag.com/en/edag-group/press/corona-crisis-team/edagmask4all

Important information:
The effectiveness of the mask depends more than anything else on the fabric used and how it is fitted in the clamps. It is therefore not possible to rule out the risk that you might still be infected or infect others even though you are wearing this mask. It is also necessary to practise putting it on and taking it off, so as to avoid transferring the virus by touch. How well the clamps work also depends on the material used for the clamp. When using the 3D print data, therefore, you declare that you will be using the mask at your own risk.
モデル制作者について
1 model upload
承認されたプロフィール