3D model of uwcharlie1983. The models were repaired and checked for printability.
This a weighted poker card capper. It is placed on your hole cards during a hand
...さらに表示 to make sure they are not accidentally folded. The base is an ellipse designed so that the minor diameter is the same diameter (39mm) as a standard size poker chip.
This design is a hippopotamus head emerging from water.
--- Printing ---
1) For 2 color hippo & water: I only have a single extruder so I set the print to pause at a height of 21.35mm. This allowed me to change to a different color filament for the hippo head.
2) I printed the holder upside down with line support material spaced at 4.5mm.
--- Assembly ---
1) The holder is designed to have 4 nickels placed inside of it as ballast prior to assembly.
2) With the nickels inside the holder snap the other part over the top of it.
Printer brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
No
Supports:
Yes
Resolution:
0.1mm
Infill:
10%
