3D model of teachingtech
The models were repaired and checked for printability.
A modified Z stop holder so the homing height could quickly and accurately be
...さらに表示 adjusted independant of the bed levelling screws. This was in preparation for fitting a thicker bed.
I reverse engineered the part from a very close to fitting design by kapral_82. The process is covered in the linked video.
Upper - add two bolts: M3 x 10mm as a retainer and M3 x 30mm as the end stop screw. Cut the thread carefully the first time you insert them.
Lower - press in two M3 lock nuts. Use M3 x 10mm bolts to hold to printer frame.
www.youtube.com/c/teachingtech
