3D model of turbo_sunshine
The models were repaired and checked for printability.
This is my Fully 3D-Printed Phone Holder for your desk, car or Space
...さらに表示 station?
Layer height: 0.2mm or finer
Infill: 15-30% - Cubic
Cooling fan: 100%
Z-Seam alignment: Random
Top and bottom layers: 3, with lines pattern
Horizontal expansion compensation: -This is printer specific; I use -0.07mm, but I included a test piece for easier tuning.
https://www.instagram.com/sunshine_turbo
