3D model of turbo_sunshine
The models were repaired and checked for printability.
This is my Print in place - Compliant mechanism using Dial indicator! No
...さらに表示 supports, no assembly, just print and use!
All clearances are 0.3mm/ 0.4mm/ 0.5mm, so most household 3d-printers should have no problems printing it.
Important:
-Use 0.2mm layer height or finer!
-Use a 0.4mm Nozzle
-No Support
Changed the ender3 dial holder to be in the correct print orientation.
https://www.instagram.com/sunshine_turbo
