3D model of turbo_sunshine
The models were repaired and checked for printability.
This is a print in place model, meaning there is no assembly
...さらに表示 required!
Important:
-Use 0.2mm layer height (or finer)
-Use a 0.4mm Nozzle (or finer)
-No Support
-No horizontal expansion compensation!
Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
https://www.instagram.com/sunshine_turbo
