3D model of killonious
The models were repaired and checked for printability.
This is my entry for the 2017 Costume Contest.
Its a Cursed Skull Mask. Whoever
...さらに表示 removes this mask from the build plate is forever cursed...CURSED!...CURSED!!!!
This mask will fit an adult male...CURSED!
Finished Model
1) Mask was printed in PLA at 0.2mm and 15% infill.
2) Took 19 hours to print entire mask.
3) Primed with primer filler
4) Sanded in with an electric sander (180 grit)
5) Primed again with primer filler
6) Hand sanded (220 grit)
7) Primed again with regular primer
8) Spray painted with black glossy paint
9) Coated with glossy finish
10) Painted white oil paint all over and wiped off with a paper towel.
11) Rub n Buff gold Leaf was used on the raised areas.
12) Coated with glossy finish again.
https://www.instagram.com/killonious/
