I designed my own fictive decorative twisted building!
Printing these twisted buildings in different scales and colors makes a nice variety .
How i made it:
...さらに表示 https://youtu.be/Yt44gVbIAu4
How i 3D printed it: https://youtu.be/Ge1UXSAqjOs
This building has thin walls, so that printing doesn't take too long.
Only the top is massive with 45° corners to avoid drooping filament.
My PLA Simplify3D print settings:
- 3600mm/minute (60mm/second)
- hotend 185°C | bed 55°C
- 250 micron | infill 10%
- 3 top layers | 3 bottom layers | 2 outline layers
- brass nozzle 0.35mm
- extrusion width 0.44mm
- retraction 1.00mm
- extrusion multiplier 0.95
- coasting 0.30mm
- wipe distance off
- fan 100%
- no support needed
