3D Systems sPro 140

sPro 140 #0sPro 140 #1sPro 140 #2sPro 140 #3

Properties

Build Volume 550 x 550 x 460 mm (22 x 22 x 18 in.)
Layer Resolution Low 15 micron (0.006 in.)
Layer Resolution High 8 micron (0.0003 in.)
Brand3D Systems
Machine type 3D Printer
テクノロジー レーザー焼結 (SLS)
素材 DuraForm PA プラスチック, DuraForm EX, DuraForm GF, DuraForm HST, DuraForm Flex
Websitehttps://www.3dsystems.com/3d-printers/spro-140
Average Price Contact manufacturer

About sPro 140

HIGH REPEATABILITY FOR PRODUCTION PARTS

Produce end-use 3D printed thermoplastic and composite parts with a high level of impact resistance, surface finish and precision, and with a broad range of available materials.

With its combination of production speed, high throughput and capacity, and excellent part quality, the sPro 140, produces robust 3D printed end-use parts up to 550 mm length or large amount of parts, nested in the full 22 x 22 x 18 in (550 x 550 x 460 mm) build volume. This SLS (Selective Laser Sintering) production printer produces durable parts for a multitude of applications such as housings, machinery components, complex end-use parts such as ductings, functional test parts and assemblies, as well as healthcare products and tools. 

High-capacity part manufacturing

With its high production speed and the ability to stack parts in the entire build volume, the sPro 140 offers both a faster and a more economic solution to other printer technologies.

Impact-resistant, durable parts

Our customers count on this robust printer for the toughest applications, year after year. It offers far superior living hinges, snap fit and other mechanical joints than any other technology. With a broad range of materials to match your requirements, the sPro 140 produces strong parts with high thermal and chemical resistance. And it is the most economical thermoplastic solution for large quantities of parts.

  • APPLICATIONS:

    • Impact-resistant, durable prints
    • Engine housings and other protective covers
    • Jigs and fixtures
    • Reduced weight production parts
    • Knobs, handles and other dashboard/interior parts
    • Machinery components
    • Lightweight duct work
    • Small to medium run manufacturing
    • Healthcare device and tools manufacturing
  • FEATURES:

    • Selective Laser Sintering (SLS) technology
    • Max build envelope capacity
      (W x D x H) 22 x 22 x 18 in
      (550 x 550 x 460 mm)
    • Broad range of DuraForm engineered plastic, composite and elastomer materials
    • High throughput, high capacity printer
    • Automated 3D part nesting
    • Open material architecture – flexible print parameters
  • BENEFITS:

    • Manufacture strong end-use parts and functional prototypes faster
    • Easily print any design without using supports or post processing
    • Integrated printer and material solution with expert application support
    • Lower cost of ownership with high throughput and capacity
    • Superior living hinges, snap fit and other mechanical joints

3D printed products made using the sPro 140

20171019_175454.jpg20171019_175402.jpg20171019_175434.jpg20171019_175533.jpg20171123_090146.jpg20171123_090203.jpg20171123_085239.jpg20171111_075112.jpg20171111_074935.jpg20171114_051843.jpg20171114_051858.jpg20171009_140153.jpg20171009_140200.jpg20171009_140146.jpg20171009_140122.jpg20171009_140131.jpg20171009_140138.jpg20171009_140427.jpg20171009_140241.jpg20171009_174310.jpg20171004_202918.jpg20170925_185334.jpg20170409_072118.jpg20170410_055009.jpg20170908_182732.jpg20170908_182711.jpg20170908_182719.jpg20170908_182725.jpg20170908_182702.jpg20170908_182750.jpg20170903_070423.jpg20170903_070323.jpg20170903_070353.jpg20170903_070339.jpg