Sedgwick Sedgwick DLP 

Sedgwick DLP  #0Sedgwick DLP  #1Sedgwick DLP  #2

Properties

Build Volume 75 x 75 x 120 mm (2.9 x 2.9 x 4.7 in.)
Layer Resolution Low 100 micron (0.004 in.)
Layer Resolution High 100 micron (0.004 in.)
BrandSedgwick
Machine type 3D Printer
テクノロジー 光造形 (DLP)
素材 レジン, キャスタブルレジン
Websitehttp://sedgwick3d.com/
Average Price $499.00

About Sedgwick DLP 

This kit includes all the parts to build the printer except the projector and resin.

  • Laser cut Birch wood frame.
  • Custom pcb carrier board for the Arduino mcu and A4988 stepper driver.
  • High precision linear slide
  • High qualtity, external optics with an antireflective coating (You don't need to void your projectors warranty)
  • Small vat (build area is 75mm x 75mm x 50mm deep)
  • Medium vat (build area is 75mm x 75mm x 120mm deep)
  • Aluminum build platform.
  • FlashPoint™ printing software.

What else do I need to start printing? One of the following projectors and resin.

You will need to buy the projector. Printer specifications are based on the Acer X1240. These models fit the frame:

  • Acer X1240 1024x768 2700 Lumens
  • ViewSonic PJD6543 1024x768 3000 Lumens
  • Hitachi CP-DX250 1024x768 2500 Lumens
  • Acer H6510BD 1920x1080 3000 Lumens (Experimental: it is HD and will yield higher x and y resolution and will affect the print area)

Resin: The software is adjustable for may type of resin, here are two recommended brands.

  • 3D Ink brand resin.
  • MakerJuice G+