Printrbot Printrbot+

Printrbot+ #0

Properties

Build Volume 250 x 250 x 265 mm (10 x 10 x 10 in.)
Layer Resolution Low 400 micron (0.016 in.)
Layer Resolution High 50 micron (0.002 in.)
Nozzle Diameter 0.4 mm
Filament Diameter 1.75 mm

Documents

BrandPrintrbot
Machine type 3D Printer
テクノロジー 熱溶解積層法 (FDM)
素材 PLA , ABS, ナイロン, スチールPLA, FLEX (弾塑性プラスチック), Magnetic Iron PLA, PLA-CF, Conductive PLA
Websitehttp://printrbot.com/shop/assembled-metal-printrbot-plus/
Average Price $1,199.00

About Printrbot+

The Printrbot Plus is constructed of powder coated metal and machined aluminum with open platform for fabricating parts up to 10 x 10 x 10 inches using 1.75mm PLA filament. The printer head moves on the X (left to right) and Z (up and down) axes, while the heated print bed moves on the Y (backward and forward) axis. The Mic 6 aluminum bed is extremely flat and works with an Auto-Leveling Probe with the user-chosen software to calibrate the height of the print head. The printer uses open source software and connects to the computer using the included mini-USB cable. Using a micro-SD card (sold separately), the printer can be disconnected from the computer for untethered printing during long print jobs.

Linear rails and carts for stability and smooth movement of the print head and bed. The GT2 belt and aluminum pulley system facilitates precise movement of the print head and bed. The NEMA 17 stepper motors meet the National Electrical Manufacturers Association (NEMA) standard ICS 16-2001.

Technical Specifications:

  • Model: 1504
  • Build Volume X-Y-Z: 250mm x 250mm x 250mm (apx 10″ x 10″ x 10″)
  • Print Resolution: 50 Microns
  • Print Speed: 80mm/sec max recommended
  • Filament: 1.75mm PLA (sample included) as well as flexible and ABS
  • Extruder: v2 Alu Extruder (direct drive). 1.75mm Ubis 13S Hot End with 0.4mm nozzle
  • Auto Leveling: Auto-Leveling Probe works with software to calibrate Z axis height (see video)
  • Print Bed: Heated: Max temperature of 80C – Mic 6 aluminum (0.3mm level tolerance)
  • Construction: Powder coated steel and aluminum body
  • Rails: 12mm Linear Rails
  • Belt: GT2
  • Pulleys: 20 tooth, dual flange GT2 aluminum
  • Electronics: Printrbot Rev F Printrboard with micro-USB connection (cable included) and micro SD card slot for untethered printing
  • Software: Printrbot does not provide software, but recommends Cura – available for free download.
  • Power Requirements: 12V 350W ATX power supply (included)
  • Max Current Draw: ~5-9 Amps