- PLA (usually Filaprint PLA X3) for non-flexible parts where low weight is not required;
- Nylon (usually Taulman...さらに表示 910) when low weight / high strength and some flexibility is required.;
We typically reserve our UM2+ for smaller parts, high quality, printed typically with 0.4mm nozzle and 0.15mm layer height. Other nozzle sizes (0.2 / 0.5 / 0.6 / 0.8 mm) and quality are of course available.
We use our UM2+ Extended with the following filaments:
- PLA (usually Filaprint PLA X3) for non-flexible parts where low weight is not required;
- Nylon (usually...さらに表示 Taulman 910) when low weight / high strength and some flexibility is required.;
We typically reserve our UM2+ Extender for larger parts (up to 12" / 300mm), typically printed with 0.6mm nozzle and 0.25mm layer height. Other nozzle sizes (0.2 / 0.4 / 0.5 / 0.8 mm) and quality are of course available.
3Dモデル
モデルの画像
他のファイル
3Dモデル処理中
Need something special?
Request a Free Quote
Total: 11.63
USD
Our site uses cookies. By continuing to use our site you are agreeing to our Privacy Policy
